20250712确认NanoPC-T6开发板的Android14的SDK:rk35xx-android14-20250609.tgz以EVB1编译不能启动
rootroot@rootroot-X99-Turbo:~$
rootroot@rootroot-X99-Turbo:~$ cd 14TB/versions/
rootroot@rootroot-X99-Turbo:~/14TB/versions$ ll
rootroot@rootroot-X99-Turbo:~/14TB/versions$ cd orig3588_Android14k7/
rootroot@rootroot-X99-Turbo:~/14TB/versions/orig3588_Android14k7$ cd ..
rootroot@rootroot-X99-Turbo:~/14TB/versions$
rootroot@rootroot-X99-Turbo:~/14TB/versions$ cd rk3588-android14-FriendlyElec/
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$ ll
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$ source build/envsetup.sh
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$ lunch
48. rk3588_u-userdebug
Pick from common choices above (e.g. 13) or specify your own (e.g. aosp_barbet-eng): 48
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$ ./build.sh -UACKu
20250712确认NanoPC-T6开发板的Android14的SDK:rk35xx-android14-20250609.tgz以EVB1编译不能启动
2025/7/12 16:39
缘起:想熟悉RK3588的Android14系统。
直接编译友善之臂的NanoPC-T6开发板的Android14的SDK:rk35xx-android14-20250609.tgz。
刷机之后不能启动。原因待查。
【可能是配置引导的文件系统异常了!^_】
异常:
No bootable slots found, use lastboot.
正常:
SPL: A/B-slot: _a, successful: 1, tries-remain: 0
异常:
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
TEEC: Waring: Could not find security partition
正常:
A/B-slot: _a, successful: 1, tries-remain: 0
也许可以先用乐晓电子的K7开发板的SDK,先编译一个能在RK3588的EVB1方案下能用的Android14之后再来查找原因了!
K7的EVB1默认是2个/双RK806,T6使用了1个/单RK806。刷机之后也还是启动不了。
下一步直接使用T6的DTS或者先修改PMIC之后让T6先启动起来!





编译步骤:
[BEGIN] 2025/7/12 16:45:55
rootroot@rootroot-X99-Turbo:~$
rootroot@rootroot-X99-Turbo:~$
rootroot@rootroot-X99-Turbo:~$ cd 14TB/versions/
rootroot@rootroot-X99-Turbo:~/14TB/versions$ ll
total 960078044
drwxrwxr-x 18 rootroot rootroot 4096 7月 10 10:36 ./
drwxrwxrwx 17 rootroot rootroot 4096 7月 8 13:52 ../
-rw-rw-r-- 1 rootroot rootroot 34876361676 6月 23 12:00 Android13.0_20250623_1151荣品PRO-RK3566原始打包.tgz
-rw-rw-r-- 1 rootroot rootroot 34322660150 7月 1 10:44 Android14K7_20250701_1034原始打包.tgz
-rw-rw-r-- 1 rootroot rootroot 34322522881 7月 1 19:31 Android14K7_20250701_1922更新了.tgz
-rwx------ 1 rootroot rootroot 50 6月 24 09:33 android14的整理.txt*
drwxrwxr-x 2 rootroot rootroot 4096 6月 14 09:51 OK3576-C_Linux6.1.84/
drwxrwxr-x 16 rootroot rootroot 4096 6月 17 17:20 OK3576_linux_source6.1.75/
-rw-rw-r-- 1 rootroot rootroot 28161984365 6月 17 19:06 OK3576_linux_source6.1.75_20250617_1823编译完成-终端3次-2次装软件-1次下载中断.tgz
drwxrwxr-x 15 rootroot rootroot 4096 6月 18 21:14 ok3576-linux-source6.1.84/
drwxr-xr-x 40 rootroot rootroot 4096 6月 27 13:50 OK3588-android12-R5source/
-rw-rw-r-- 1 rootroot rootroot 62959755625 6月 27 15:21 OK3588-android12-R5source_20250627_1356整体编译.tgz
-rw-rw-r-- 1 rootroot rootroot 30622173814 6月 24 17:19 OK3588-android12-source_20250624_1710飞凌R5版本的原始打包.tgz
drwxr-xr-x 38 rootroot rootroot 4096 7月 12 14:01 orig3576-android14FriendlyElec/
-rw-rw-r-- 1 rootroot rootroot 81995098752 7月 7 17:41 orig3576-android14FriendlyElec_20250707_1542友善之臂原始编译刷K7出错DDR.tgz
drwxrwxr-x 36 rootroot rootroot 4096 7月 1 16:13 orig3588_Android14k7/
-rw-rw-r-- 1 rootroot rootroot 80953168891 7月 1 18:44 orig3588_Android14k7_20250701_1630使用K7的SDK整体编译得到.tgz
drwxrwxr-x 36 rootroot rootroot 4096 6月 23 16:58 pro3566_Android13.0/
-rw-rw-r-- 1 rootroot rootroot 68944574152 6月 23 19:59 pro3566_Android13.0_20250623_1824荣品原始编译.tgz
drwxrwxrwx 37 rootroot rootroot 4096 7月 3 14:54 pro3576_Android14/
-rw-rw-r-- 1 rootroot rootroot 33952641070 7月 3 09:54 pro3576_Android14_20250703_0945原始打包.tgz
-rw-rw-r-- 1 rootroot rootroot 83058668113 7月 3 17:15 pro3576_Android14_20250703_1455原始编译了.tgz
drwxrwxr-x 36 rootroot rootroot 4096 7月 10 09:54 RD-RK3588_Android13/
-rw-rw-r-- 1 rootroot rootroot 34880685000 6月 25 09:35 RD-RK3588_Android13_20250625_0927荣品原始打包.tgz
-rw-rw-r-- 1 rootroot rootroot 68934278642 6月 25 16:20 RD-RK3588_Android13_20250625_1447荣品编译完成了.tgz
drwxrwxr-x 36 rootroot rootroot 4096 7月 9 10:55 rk3576-android14.0-20250217k7/
-rw-rw-r-- 1 rootroot rootroot 81334979856 7月 8 18:00 rk3576-android14.0-20250217k7_1602.tgz
-rw-rw-r-- 1 rootroot rootroot 34334036636 6月 19 17:45 rk3576-android14.0-20250217k7_20250619_1735原始打包无patch.tgz
-rw-rw-r-- 1 rootroot rootroot 34365005999 7月 8 21:04 rk3576-android14.0_20250708_2055原始打包了.tgz
drwxrwxr-x 36 rootroot rootroot 4096 7月 10 15:40 rk3576-android14.0k7_20250704/
drwxrwxr-x 16 rootroot rootroot 4096 7月 4 13:54 rk3576-linux20250618k7/
-rwx------ 1 rootroot rootroot 7901995484 6月 19 09:14 rk3576-linux20250618k7_0912原始打包没有dl.tgz*
-rw-rw-r-- 1 rootroot rootroot 19680233966 6月 19 12:29 rk3576-linux20250618k7_20250619_1149.tgz
drwxr-xr-x 36 rootroot rootroot 4096 6月 26 13:46 rk3588-android14-FriendlyElec/
-rw-rw-r-- 1 rootroot rootroot 83103394308 6月 26 15:34 rk3588-android14-FriendlyElec_20250626_1353使用友善之臂的SDK编译通过了.tgz
-rw-rw-r-- 1 rootroot rootroot 35630838073 6月 18 10:53 rk35xx-android14-20250609.tgz
drwxrwxr-x 5 rootroot rootroot 4096 7月 7 11:14 rockdev乐晓的K7/
drwxrwxr-x 12 rootroot rootroot 4096 6月 12 15:27 sd-fuse_h3/
-rw-rw-r-- 1 rootroot rootroot 83043790 6月 11 16:39 sd-fuse_h3_20250611_1639原始打包.tgz
-rw-rw-r-- 1 rootroot rootroot 851915809 6月 11 17:40 sd-fuse_h3_20250611_1740下载uboot+kernel了.tgz
-rw-r--r-- 1 root root 3676790717 6月 11 21:01 sd-fuse_h3_20250611_2100使用root权限打包.tgz
-rw-r--r-- 1 root root 4172775805 6月 12 18:14 sd-fuse_h3_20250612_1813使用root权限打包.tgz
-rwx------ 1 rootroot rootroot 97 6月 24 09:43 SDK说明.txt*
drwxr-xr-x 36 rootroot rootroot 4096 7月 1 10:22 T6rk3588-android14/
-rwx------ 1 rootroot rootroot 1693 7月 7 18:23 z12.txt*
-rwx------ 1 rootroot rootroot 1407 6月 26 15:59 'z12 - 副本.txt'*
-rwx------ 1 rootroot rootroot 1076 6月 26 15:54 z1.txt*
-rwx------ 1 rootroot rootroot 2311 6月 26 15:54 z.txt*
rootroot@rootroot-X99-Turbo:~/14TB/versions$
rootroot@rootroot-X99-Turbo:~/14TB/versions$ cd orig3588_Android14k7/
rootroot@rootroot-X99-Turbo:~/14TB/versions/orig3588_Android14k7$ cd ..
rootroot@rootroot-X99-Turbo:~/14TB/versions$
rootroot@rootroot-X99-Turbo:~/14TB/versions$ cd rk3588-android14-FriendlyElec/
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$ ll
total 257476
drwxr-xr-x 36 rootroot rootroot 4096 6月 26 13:46 ./
drwxrwxr-x 18 rootroot rootroot 4096 7月 10 10:36 ../
-rwxr-xr-x 1 rootroot rootroot 8091 6月 13 12:15 2build.sh*
-rwxr-xr-x 1 rootroot rootroot 9212 6月 25 16:53 3mkimage.sh*
lrwxrwxrwx 1 rootroot rootroot 19 6月 13 12:14 Android.bp -> build/soong/root.bp
drwxr-xr-x 37 rootroot rootroot 4096 6月 13 12:15 art/
drwxr-xr-x 14 rootroot rootroot 4096 6月 13 12:15 bionic/
drwxr-xr-x 4 rootroot rootroot 4096 6月 13 12:15 bootable/
lrwxrwxrwx 1 rootroot rootroot 26 6月 13 12:15 bootstrap.bash -> build/soong/bootstrap.bash*
drwxr-xr-x 9 rootroot rootroot 4096 6月 13 12:15 build/
lrwxrwxrwx 1 rootroot rootroot 23 6月 13 12:14 BUILD -> build/bazel/bazel.BUILD
-rwxr-xr-x 1 rootroot rootroot 12550 6月 25 16:56 build.sh*
lrwxrwxrwx 1 rootroot rootroot 33 6月 13 12:14 .classpath -> device/rockchip/common/.classpath*
lrwxrwxrwx 1 rootroot rootroot 46 6月 13 12:14 Copyright_Statement.pdf -> device/rockchip/common/Copyright_Statement.pdf
drwxr-xr-x 13 rootroot rootroot 4096 6月 13 12:15 cts/
drwxr-xr-x 7 rootroot rootroot 4096 6月 13 12:15 dalvik/
drwxr-xr-x 5 rootroot rootroot 4096 6月 13 12:15 developers/
drwxr-xr-x 22 rootroot rootroot 4096 6月 13 12:15 development/
drwxr-xr-x 5 rootroot rootroot 4096 6月 25 16:55 device/
drwxr-xr-x 409 rootroot rootroot 12288 6月 13 12:15 external/
drwxr-xr-x 16 rootroot rootroot 4096 6月 13 12:15 frameworks/
-rw-r--r-- 1 rootroot rootroot 355 6月 13 12:14 .gitignore
drwxr-xr-x 20 rootroot rootroot 4096 6月 13 12:15 hardware/
lrwxrwxrwx 1 rootroot rootroot 33 6月 13 12:15 javaenv.sh -> device/rockchip/common/javaenv.sh
drwxr-xr-x 5 rootroot rootroot 4096 6月 13 12:15 kernel/
drwxr-xr-x 27 rootroot rootroot 4096 6月 25 18:16 kernel-6.1/
-rw-rw-r-- 1 rootroot rootroot 244052527 6月 25 16:51 kernel-6.1b.tgz
drwxr-xr-x 20 rootroot rootroot 4096 6月 13 12:15 libcore/
drwxr-xr-x 9 rootroot rootroot 4096 6月 13 12:15 libnativehelper/
drwxr-xr-x 9 rootroot rootroot 4096 6月 13 12:15 mkcombinedroot/
-rwxr-xr-x 1 rootroot rootroot 9828 6月 25 16:56 mkimage.sh*
drwxrwxr-x 14 rootroot rootroot 4096 6月 26 13:46 out/
drwxr-xr-x 9 rootroot rootroot 4096 6月 13 12:15 packages/
drwxr-xr-x 5 rootroot rootroot 4096 6月 13 12:15 pdk/
drwxr-xr-x 10 rootroot rootroot 4096 6月 13 12:15 platform_testing/
drwxr-xr-x 32 rootroot rootroot 4096 6月 13 12:17 prebuilts/
-rwxr-xr-x 1 rootroot rootroot 519 6月 13 12:17 restore_patches.sh*
drwxr-xr-x 9 rootroot rootroot 4096 6月 25 18:06 rkbin/
drwxr-xr-x 4 rootroot rootroot 4096 6月 13 12:14 RKDocs/
drwxr-xr-x 4 rootroot rootroot 4096 6月 13 12:17 rkst/
drwxr-xr-x 5 rootroot rootroot 4096 6月 13 12:15 RKTools/
drwxrwxr-x 3 rootroot rootroot 4096 6月 26 13:46 rockdev/
drwxr-xr-x 20 rootroot rootroot 4096 6月 13 12:17 sdk/
-rwxr-xr-x 1 rootroot rootroot 356 6月 13 12:17 setenv.sh*
drwxr-xr-x 48 rootroot rootroot 4096 6月 13 12:17 system/
drwxr-xr-x 12 rootroot rootroot 4096 6月 13 12:17 test/
drwxr-xr-x 4 rootroot rootroot 4096 6月 13 12:17 toolchain/
drwxr-xr-x 25 rootroot rootroot 4096 6月 13 12:17 tools/
drwxr-xr-x 27 rootroot rootroot 4096 6月 26 13:42 u-boot/
-rw-rw-r-- 1 rootroot rootroot 19374801 6月 25 16:51 u-boot1.tgz
drwxr-xr-x 6 rootroot rootroot 4096 6月 13 12:17 vendor/
lrwxrwxrwx 1 rootroot rootroot 27 6月 13 12:15 WORKSPACE -> build/bazel/bazel.WORKSPACE
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$ source build/envsetup.sh
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$ lunch
You're building on Linux
Lunch menu .. Here are the common combinations:
1. PX30_u-user
2. PX30_u-userdebug
3. aosp_arm-eng
4. aosp_arm64-eng
5. aosp_x86-eng
6. aosp_x86_64-eng
7. nanopi5-user
8. nanopi5-userdebug
9. nanopi5_box-user
10. nanopi5_box-userdebug
11. nanopi6-user
12. nanopi6-userdebug
13. nanopi6_box-user
14. nanopi6_box-userdebug
15. nanopim5-user
16. nanopim5-userdebug
17. rk3326_u-user
18. rk3326_u-userdebug
19. rk3326_ugo-user
20. rk3326_ugo-userdebug
21. rk3399_u-user
22. rk3399_u-userdebug
23. rk3562_t-user
24. rk3562_t-userdebug
25. rk3562_u-user
26. rk3562_u-userdebug
27. rk3562_ugo-user
28. rk3562_ugo-userdebug
29. rk3566_t-user
30. rk3566_t-userdebug
31. rk3566_u-user
32. rk3566_u-userdebug
33. rk3566_ugo-user
34. rk3566_ugo-userdebug
35. rk3568_t-user
36. rk3568_t-userdebug
37. rk3568_u-user
38. rk3568_u-userdebug
39. rk3576_u-user
40. rk3576_u-userdebug
41. rk3576s_u-user
42. rk3576s_u-userdebug
43. rk3588_s-user
44. rk3588_s-userdebug
45. rk3588_t-user
46. rk3588_t-userdebug
47. rk3588_u-user
48. rk3588_u-userdebug
49. rk3588s_s-user
50. rk3588s_s-userdebug
51. rk3588s_t-user
52. rk3588s_t-userdebug
53. rk3588s_u-user
54. rk3588s_u-userdebug
Which would you like? [aosp_arm-eng]
Pick from common choices above (e.g. 13) or specify your own (e.g. aosp_barbet-eng): 48
Hint: next time you can simply run 'lunch rk3588_u-userdebug'
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=14
PRODUCT_INCLUDE_TAGS=com.android.mainline
TARGET_PRODUCT=rk3588_u
TARGET_BUILD_VARIANT=userdebug
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv8-a
TARGET_2ND_CPU_VARIANT=generic
HOST_OS=linux
HOST_OS_EXTRA=Linux-5.15.0-131-generic-x86_64-Ubuntu-20.04.6-LTS
HOST_CROSS_OS=windows
BUILD_ID=UQ1A.240205.004.B1
OUT_DIR=out
============================================
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$
rootroot@rootroot-X99-Turbo:~/14TB/versions/rk3588-android14-FriendlyElec$ ./build.sh -UACKu
[END] 2025/7/12 17:11:30
刷机的LOG:
[BEGIN] 2025/7/12 14:53:11
DDR 9fa84341ce typ 24/09/06-09:51:11,fwver: v1.18
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
ch0 ttot16
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
ch1 ttot16
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
ch2 ttot16
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
ch3 ttot16
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x1
DQS rds:h1,h1
CH0 RX Vref:29.3%, TX Vref:18.8%,0.0%
DQ rds:l0 l0 h1 h2 h2 h5 l0 l0, h3 h2 h2 h5 h1 h2 h1 h2
DQS rds:l0,l0
CH1 RX Vref:27.1%, TX Vref:18.8%,0.0%
DQ rds:h4 h3 l0 h2 h7 h2 h1 h1, h1 h1 h1 h1 h1 l0 h3 h5
DQS rds:h1,h1
CH2 RX Vref:27.9%, TX Vref:19.8%,0.0%
DQ rds:h1 h2 h1 h5 h2 h3 h7 h7, h2 h3 h2 h5 h3 h1 h2 h2
DQS rds:h1,h1
CH3 RX Vref:27.9%, TX Vref:18.8%,0.0%
DQ rds:h4 h1 l0 h2 h1 h1 h3 h1, h2 h1 h2 l0 h1 h7 h1 h3
stride=0x2, ddr_config=0x0
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x0
change to F1: 528MHz
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
change to F2: 1068MHz
ch0 ttot12
ch1 ttot12
ch2 ttot12
ch3 ttot12
change to F3: 1560MHz
ch0 ttot14
ch1 ttot14
ch2 ttot14
ch3 ttot14
change to F0: 2112MHz
ch0 ttot16
ch1 ttot16
ch2 ttot16
ch3 ttot16
out
U-Boot SPL board init
U-Boot SPL 2017.09-ge4e124926e-230922 #lxh (Sep 25 2023 - 10:58:38), fwver: v1.13
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
No bootable slots found, use lastboot.
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 (gzip @0x00240000) ... sha256(67a8e52a0f...) + sha256(acb6e4b004...) + OK
## Checking uboot 0x00200000 (gzip @0x00400000) ... sha256(dbd338c8a0...) + sha256(9093b20a13...) + OK
## Checking fdt 0x00352348 ... sha256(a434b1c4fe...) + OK
## Checking atf-2 0xff100000 ... sha256(11bdd78b17...) + OK
## Checking atf-3 0x000f0000 ... sha256(b2af21b504...) + OK
## Checking optee 0x08400000 (gzip @0x08600000) ... sha256(64d11c2ea1...) + sha256(3e0a1f56ed...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 487.413/649.25 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-893-g1653f2a08:derrick.huang, fwver: v1.49
NOTICE: BL31: Built : 14:27:47, Mar 3 2025
INFO: spec: 0x1
INFO: code: 0x88
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: l3 cache partition cfg-0
INFO: system boots from cpu-hwid-0
INFO: disable memory repair
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-898-g57604957e #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Fri Nov 15 16:04:27 CST 2024 aarch64, fwver: v1.19
I/TC: OP-TEE memory: TEEOS 0x200000 TA 0xc00000 SHM 0x200000
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09 (Jun 25 2025 - 18:06:40 +0800)
Model: Rockchip RK3588 Evaluation Board
MPIDR: 0x0
PreSerial: 2, raw, 0xfeb50000
DRAM: 4 GiB
Sysmem: init
Relocation Offset: eda0b000
Relocation fdt: eb9fa020 - eb9fecd8
CR: M/C/I
Using default environment
optee api revision: 2.0
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS400 Enhanced Strobe, 200Mhz
PartType: EFI
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
TEEC: Waring: Could not find security partition
DM: v2
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
FIT: No boot partition
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
Failed to load DTB, ret=-2
No valid DTB, ret=-22
Failed to get kernel dtb, ret=-22
No bootable slots found.
rk_avb_get_current_slot() failed
Decrease ab tries count fail!
Model: Rockchip RK3588 Evaluation Board
rockchip_set_serialno: could not find efuse/otp device
Minidump: init...
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
boot mode: recovery (misc)
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
b0pll 24000 KHz
b1pll 24000 KHz
lpll 24000 KHz
v0pll 24000 KHz
aupll 24000 KHz
cpll 1500000 KHz
gpll 1188000 KHz
npll 24000 KHz
ppll 1100000 KHz
aclk_center_root 702000 KHz
pclk_center_root 100000 KHz
hclk_center_root 396000 KHz
aclk_center_low_root 500000 KHz
aclk_top_root 750000 KHz
pclk_top_root 100000 KHz
aclk_low_top_root 396000 KHz
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'): 0
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
ANDROID: reboot reason: "recovery"
No bootable slots found.
rk_avb_get_current_slot() failed
Android boot failed, error -1.
## Booting FIT Image No bootable slots found.
rk_avb_append_part_slot: failed to get slot suffix !
FIT: No boot partition
FIT: No fit blob
FIT: No FIT image
Unknown command 'bootrkp' - try 'help'
MMC: no card present
mmc_init: -123, time 0
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Device 2: JEDEC id bytes: ef, 60, 19
SF: Detected sfc_nor with page size 256 Bytes, erase size 4 KiB, total 32 MiB
Vendor: 0x2207 Rev: V1.00 Prod: sfc_nor
Type: Hard Disk
Capacity: 32.0 MB = 0.0 GB (65536 x 512)
... is now current device
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
GUID Partition Table Header signature is wrong: 0xFFFFFFFFFFFFFFFF != 0x5452415020494645
** No partition table - mtd 2 **
Device 1:
Device 0: unknown device
starting USB...
No working controllers found
USB is stopped. Please issue 'usb start' first.
starting USB...
No working controllers found
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-rockchip
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
starting USB...
No working controllers found
No ethernet found.
No bootable slots found.
Enter fastboot...OK
[END] 2025/7/12 14:53:23
K7的SDK刷机T6之后的LOG:
[BEGIN] 2025/7/12 16:51:20
DDR 3488111f83 cym 24/04/12-12:49:26,fwver: v1.17
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x1
CH0 RX Vref:29.3%, TX Vref:18.8%,0.0%DQ rds:
h0 l0, h0 l0, h2 l0, h3 l0, h2 l0, h5 l0, h0 l0, h1 l0,
h3 l0, h2 l0, h3 l0, h6 l0, h2 l0, h3 l0, h1 l0, h2 l0,
CH1 RX Vref:27.1%, TX Vref:19.8%,0.0%DQ rds:
h5 l0, h2 l0, h1 l0, h2 l0, h6 l0, h2 l0, h1 l0, h1 l0,
h1 l0, h1 l0, h1 l0, h1 l0, h3 l0, h0 l0, h3 l0, h5 l0,
CH2 RX Vref:27.9%, TX Vref:19.8%,0.0%DQ rds:
h1 l0, h2 l0, h2 l0, h5 l0, h2 l0, h3 l0, h6 l0, h7 l0,
h2 l0, h2 l0, h1 l0, h5 l0, h2 l0, h1 l0, h2 l0, h2 l0,
CH3 RX Vref:28.9%, TX Vref:18.8%,0.0%DQ rds:
h6 l0, h1 l0, h0 l0, h1 l0, h1 l0, h1 l0, h2 l0, h1 l0,
h3 l0, h1 l0, h2 l0, h0 l0, h1 l0, h7 l0, h1 l0, h5 l0,
stride=0x2, ddr_config=0x0
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x0
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
Boot1 Release Time: Oct 17 2023 17:09:54, version: 1.11
Emmc IO init.
Emmc IO init.
mmc_set_bus_width: 1
SetEmmcClk: 375000, 2, 64
mmc_switch index:183, value:0x2
mmc_switch index:185, value:0x2
SetEmmcClk: 375000, 2, 64
mmc_set_bus_width: 8
SetEmmcClk: 200000000, 0, 3
Enable PHY CLK: 200000000, timing: 9
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29600MB
FwPartOffset=2000 , 100000
UsbBoot ...89110
powerOn 91363
SoftReset, 654149 us
DDR 3488111f83 cym 24/04/12-12:49:26,fwver: v1.17
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x1
CH0 RX Vref:28.9%, TX Vref:18.8%,0.0%DQ rds:
h0 l0, h0 l0, h3 l0, h4 l0, h2 l0, h5 l0, h0 l0, h1 l0,
h3 l0, h3 l0, h2 l0, h7 l0, h2 l0, h3 l0, h1 l0, h2 l0,
CH1 RX Vref:27.1%, TX Vref:18.8%,0.0%DQ rds:
h4 l0, h2 l0, h1 l0, h2 l0, h7 l0, h2 l0, h1 l0, h1 l0,
h1 l0, h0 l0, h1 l0, h1 l0, h1 l0, h0 l0, h3 l0, h4 l0,
CH2 RX Vref:28.5%, TX Vref:18.8%,0.0%DQ rds:
h1 l0, h2 l0, h2 l0, h5 l0, h2 l0, h2 l0, h6 l0, h7 l0,
h3 l0, h2 l0, h1 l0, h5 l0, h2 l0, h1 l0, h3 l0, h2 l0,
CH3 RX Vref:28.5%, TX Vref:18.8%,0.0%DQ rds:
h3 l0, h0 l0, h0 l0, h1 l0, h1 l0, h1 l0, h2 l0, h0 l0,
h3 l0, h1 l0, h2 l0, h0 l0, h1 l0, h7 l0, h1 l0, h5 l0,
stride=0x2, ddr_config=0x0
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x0
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-ge4e124926e-230922 #lxh (Sep 25 2023 - 10:58:38), fwver: v1.13
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
Magic is incorrect.
Error validating A/B metadata from disk. Resetting and writing new A/B metadata to disk.
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 (gzip @0x00240000) ... sha256(95093a6fbd...) + sha256(64122e141b...) + OK
## Checking uboot 0x00200000 (gzip @0x00400000) ... sha256(e1d3caf5e2...) + sha256(18129de940...) + OK
## Checking fdt 0x0034d278 ... sha256(a434b1c4fe...) + OK
## Checking atf-2 0xff100000 ... sha256(ce8968e34f...) + OK
## Checking atf-3 0x000f0000 ... sha256(ce48b69fdd...) + OK
## Checking optee 0x08400000 (gzip @0x08600000) ... sha256(a594e5c3c0...) + sha256(b866e4e4a1...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 488.915/652.432 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-765-g588059758:derrick.huang, fwver: v1.46
NOTICE: BL31: Built : 18:13:16, Apr 29 2024
INFO: spec: 0x1
INFO: code: 0x88
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: l3 cache partition cfg-0
INFO: system boots from cpu-hwid-0
INFO: disable memory repair
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-791-g185dc3c92 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Tue Apr 16 11:16:18 CST 2024 aarch64, fwver: v1.16
I/TC: OP-TEE memory: TEEOS 0x200000 TA 0xc00000 SHM 0x200000
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09 (Jul 01 2025 - 12:27:37 +0800)
Model: Rockchip RK3588 Evaluation Board
MPIDR: 0x0
PreSerial: 2, raw, 0xfeb50000
DRAM: 4 GiB
Sysmem: init
Relocation Offset: eda10000
Relocation fdt: eb9f9f40 - eb9fecc8
CR: M/C/I
Using default environment
optee api revision: 2.0
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS400 Enhanced Strobe, 200Mhz
PartType: EFI
A/B-slot: _a, successful: 0, tries-remain: 7
DM: v2
RESC: 'resource_a', blk@0x0000e000
Device is: UNLOCKED
DTB: rk-kernel.dtb
HASH(c): OK
Android 13.0, Build 2000.0, v4
boot mode: recovery (misc)
ANDROID: fdt overlay OK
usb dr_mode not found
usb dr_mode not found
spi2: RK806: 2
ON=0x40, OFF=0x00
HW single pmic, the firmware dual pmic(0xe8)!
RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x39d0000
-usb device is high-speed
-DDR 3488111f83 cym 24/04/12-12:49:26,fwver: v1.17
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
Manufacturer ID:0x1
CH0 RX Vref:28.9%, TX Vref:18.8%,0.0%DQ rds:
h0 l0, h0 l0, h1 l0, h4 l0, h2 l0, h5 l0, h0 l0, h1 l0,
h3 l0, h2 l0, h3 l0, h6 l0, h1 l0, h3 l0, h1 l0, h1 l0,
CH1 RX Vref:27.1%, TX Vref:18.8%,0.0%DQ rds:
h5 l0, h2 l0, h1 l0, h2 l0, h7 l0, h2 l0, h1 l0, h1 l0,
h1 l0, h0 l0, h1 l0, h1 l0, h2 l0, h0 l0, h3 l0, h5 l0,
CH2 RX Vref:28.5%, TX Vref:19.8%,0.0%DQ rds:
h1 l0, h2 l0, h2 l0, h6 l0, h3 l0, h2 l0, h6 l0, h7 l0,
h2 l0, h3 l0, h1 l0, h5 l0, h3 l0, h1 l0, h3 l0, h2 l0,
CH3 RX Vref:28.5%, TX Vref:18.8%,0.0%DQ rds:
h5 l0, h1 l0, h0 l0, h1 l0, h1 l0, h1 l0, h1 l0, h0 l0,
h4 l0, h1 l0, h1 l0, h0 l0, h1 l0, h7 l0, h1 l0, h5 l0,
stride=0x2, ddr_config=0x0
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x0
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-ge4e124926e-230922 #lxh (Sep 25 2023 - 10:58:38), fwver: v1.13
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 (gzip @0x00240000) ... sha256(95093a6fbd...) + sha256(64122e141b...) + OK
## Checking uboot 0x00200000 (gzip @0x00400000) ... sha256(e1d3caf5e2...) + sha256(18129de940...) + OK
## Checking fdt 0x0034d278 ... sha256(a434b1c4fe...) + OK
## Checking atf-2 0xff100000 ... sha256(ce8968e34f...) + OK
## Checking atf-3 0x000f0000 ... sha256(ce48b69fdd...) + OK
## Checking optee 0x08400000 (gzip @0x08600000) ... sha256(a594e5c3c0...) + sha256(b866e4e4a1...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 487.309/651.387 ms
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-765-g588059758:derrick.huang, fwver: v1.46
NOTICE: BL31: Built : 18:13:16, Apr 29 2024
INFO: spec: 0x1
INFO: code: 0x88
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: l3 cache partition cfg-0
INFO: system boots from cpu-hwid-0
INFO: disable memory repair
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-791-g185dc3c92 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Tue Apr 16 11:16:18 CST 2024 aarch64, fwver: v1.16
I/TC: OP-TEE memory: TEEOS 0x200000 TA 0xc00000 SHM 0x200000
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09 (Jul 01 2025 - 12:27:37 +0800)
Model: Rockchip RK3588 Evaluation Board
MPIDR: 0x0
PreSerial: 2, raw, 0xfeb50000
DRAM: 4 GiB
Sysmem: init
Relocation Offset: eda10000
Relocation fdt: eb9f9f40 - eb9fecc8
CR: M/C/I
Using default environment
optee api revision: 2.0
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS400 Enhanced Strobe, 200Mhz
PartType: EFI
A/B-slot: _a, successful: 0, tries-remain: 7
DM: v2
RESC: 'resource_a', blk@0x0000e000
Device is: UNLOCKED
DTB: rk-kernel.dtb
HASH(c): OK
Android 13.0, Build 2000.0, v4
boot mode: recovery (misc)
ANDROID: fdt overlay OK
usb dr_mode not found
usb dr_mode not found
spi2: RK806: 2
ON=0x40, OFF=0x00
HW single pmic, the firmware dual pmic(0xe8)!
RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x39d0000
-usb device is high-speed
/
[END] 2025/7/12 17:15:57
更多推荐



所有评论(0)